Detailed Explanation of the Rose Water Cutting Propagation Method
A brief knowledge of green plants, introducing you to the small experience of rose propagation, detailed explanation of the rose water cutting propagation method, let's learn about it together.
Rose propagation using water cutting has the highest survival rate in spring and autumn. The climate is warm during these two seasons, and the water temperature can be easily maintained at around 15°C-25°C, which is the suitable temperature for cutting to take root. Water temperature that is too high or too low will affect root development.
In spring and autumn, collect healthy and full (already lignified) branches of the current year, 2-3 sections as one piece, cut about 2 millimeters below the last section, making sure the cut is flat. It is best to use a glass jar or a large-mouth glass bottle, or an opaque shallow-bottomed porcelain jar. Fill the container with tap water, with a water depth of 6 centimeters. Then use a piece of foam plastic 1-2 centimeters thick as a float. Make a small hole in the foam plastic block with a knife or a nail, and embed the prepared scion, with the lower end extending 3-4 centimeters. Place it in a semi-shaded area outdoors after putting it in water.
In summer, because the water temperature is high, it should be placed in a shaded area or a cool, well-ventilated indoor place. In late autumn, when the temperature is low, it can be placed in a south-facing, sunlit area outdoors or indoors to fully receive sunlight. The water should be kept clean and fresh, and it should be refilled or changed every 2-4 days. Poor water quality will cause the scion to rot.
About 15 days after water cutting, if the branch immersed in water has formed a white healing appearance, it means it has survived. If the branch turns black and shows signs of decay, it means it has died. After 30-40 days of water cutting, short and long white small roots will form at the lower end of the branch. At this time, it can be taken out for cultivation. First, determine whether to plant it in the ground or in a pot, select the planting site, then use a chopstick-thick stick to make a hole, plant the rooted branch, surround it with coarse sand, fill the soil tightly and water thoroughly, then cover it with a plastic bag for about half a month to maintain humidity. The bottle with the cutting should not be exposed to direct sunlight.
When the new buds grow 5-10 centimeters, the plastic bag can be removed to receive sunlight. After 15-20 days, it can bud and bloom. If nutrient solution is added after the roots develop, it becomes a water wall, growing and flowering in water, which is very suitable for home cultivation and can be tried according to conditions.
The advantages of the water cutting method are: simple method, high survival rate, not limited by time, and the cuttings can be made after the flowers fade.
The above detailed explanation of the rose water cutting propagation method (with pictures) is for your reference.